Deep Sub Bass
Deep Sub Bass
Play in the C1-C2 range for the deepest impact. The LFO vibrato is subtle -- keep the FM 1 slider on VCO A low (around 9 o'clock) to avoid detuning. This patch relies on the normalled VCO A triangle path through the Mixer to the VCF, so no audio cables are needed beyond the two modulation cables.
Notes
A minimal 2-cable patch that demonstrates how much tone-shaping is possible using Cascadia's normalled signal path. VCO A's triangle wave passes through the Mixer and VCF without any explicit audio patching. The Envelope A cable to VCF FM 1 overrides the normalled Envelope B connection, giving you direct control over the filter sweep shape. The slow LFO vibrato adds life without being obvious -- turn it off to hear the difference.
Cable Routing
2 cablesSlow vibrato adds subtle pitch movement
Envelope-controlled filter sweep for each note
Knob Settings
VCO A
| Control | Value |
|---|---|
| OCTAVE | 3 |
| Waveform | Triangle |
All other controls at default
VCF
| Control | Value |
|---|---|
| FREQ | 10 o'clock |
| Q | 9 o'clock |
| MODE | LP4 |
| FM 1 | 2 o'clock |
All other controls at default
Envelope A
| Control | Value |
|---|---|
| A (Attack) | full CCW |
| D (Decay) | 1 o'clock |
| S (Sustain) | 10 o'clock |
| R (Release) | 11 o'clock |
All other controls at default
LFO X/Y/Z
| Control | Value |
|---|---|
| RATE | 8 o'clock |
All other controls at default